The power module BP-1 is meant for providing the radio electronic equipment with supply voltages.
- low pulse and noise level at the output
- tough operation conditions in special-purpose equipment
- high reliability and protection from fault, overload
Electrical parameters:
Maximal input power, W, not more than
|
3,6
|
Input voltage:
from the three-phase alternating current network
|
(380 ) V with the frequency (50/60 ± 2) Hz
|
The level of industrial radio interference created by the module at the feed circuits
|
Complies with the requirements of the group 1.1.1 according to the GOST 25803-91.
|
Galvanic isolation of the input/output
|
Yes
|
Remote on/off, remote fail signal
|
Yes
|
Insulation resistance:
input/package, MOhm, not less than
|
20
|
Resistance to the breakdown voltage, V, not more than
|
1500
|
Overall dimensions, mm
|
446486153
|
Mass, kg, not more than
|
20
|
Average mean time between failures, h, not less than
|
50000
|
Average service life, years, not less than
|
15
|
Output electrical parameters:
Output voltage
|
Nominal load current, A
|
Pulse voltage, mV, not more than
|
27 V-exciter
27 V-power amplification module
27 V-antenna-matching device
5 V
15 V
minus 15 V
530 V
|
1,0
9,0
2,0
2,0
0,05
0,05
0,05
|
100
100
100
50
50
50
10000
|
Climatic parameters:
- application type – equipment of the group 1.3 of the climatic version “UHL” according to the GOST 20.39.304-98;
- operating temperature range is from minus 10° to +50 °;
- resistance to air hyperhumidity to 98% (at 35 °);
Mechanical parameters:
- resistance to sinusoidal vibration to 2 g;
|